D&D Scenes Series, Part 4

In today's post, I'll show you how to make those semi-circular alcoves that will eventually hold six dragonspawn statues. In the next post, I'll show you how to populate those alcoves with statues.

As you recall, we're trying to make this chamber, from the upcoming Vault of the Wyrm Prince adventure (dungeonoracle.com). So far, we've been working with creating sample chambers, but not really creating this room. This post will focus on getting some progress done in the chamber.

If you've followed the posts so far, you should be able to make a chamber shaped like this. Each square is 32mp in size (where 64mp is equivalent to 5' on a D&D map).

In Linedefs Mode (L), select the linedefs in red. 

Then, from the Linedefs menu, choose "Curve Linedefs".

Your screen won't look like mine above right away, until you select your settings. Use the ones shown (Vertices=8, Distance=128, Angle=60, check Fixed circular curve and Curve backwards) and press OK. As long as you have the linedefs selected, feel free to choose a texture for them (right click, select a middle texture).

Go back into "W" camera mode and you will see your new alcoves!